This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello. We have some Victron Ethernet Remote and MultiPlus Compact 12/1600/70-16.
All of them have different loggin interval. On the part of them is 1 minute, on the other 15 minutes.
I can not find where this is configured, please help. We need to set the same interval at all VER.
Hello Dmitriy.
In the GX screen itself, locally or via 'Remote console' in VRM, go 'Menu' (Device List) > 'Settings' > 'VRM online portal' > 'Log Interval'. Take your pick.
I'm sorry if the language is a barrier, but greetings from Australia. Good luck.
With GX i founded this option, the problem was with VRE only. Thanks!
You will need to send a command string to the VERs to set the logging interval.
from the manual:
To change the logging period, send log with the new period, an example setting the period to 2 minutes:
log period 2
The Ethernet Remote will reply with the new setting and the last log:
LOG
Period: 2min
Extra: off
Last log: 1 minutes and 53 seconds ago
