I have a Victron 12/24 15A Orion Smart isolted DC DC converter that I am trying to set up to power my Ecoflow Delta 2 from my Land Cruiser alternator. When I first turn it on, it will increase the 13.7V output coming from my land cruiser to 28V as I have set it. This puts around 370watts into the Ecoflow. In testing I have run it for an hour at the output drops a bit due to heat, but not much.
If I turn off the land cruiser and the Orion senses this, it will shut down as it should.
The problem is that when I turn the Land Cruiser back on, the Orion will not put out more than 20V or 280 watts into the Ecoflow.
Is there a setting that I need to use to get the Orion to return to the 28V it initially output?
