I connecected an EM530 to Cerbo GX .via the standard RS485 USB from victron.
The light flash on the USB 485 connector and I can probe the data but it is not showing up under devices . I am running OS large with Node Red
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I connecected an EM530 to Cerbo GX .via the standard RS485 USB from victron.
The light flash on the USB 485 connector and I can probe the data but it is not showing up under devices . I am running OS large with Node Red
39 People are following this question.