question

dc-marine avatar image
dc-marine asked

Lynx Smart BMS TEMP port (not in manual)

6ce226fc-2807-46fa-a6dd-2b58705a10bf.jpegHi, this Lynx Smart BMS (M10) has a TEMP port (pins 12 and 13) on the green connector block, next to the REM pins. There is no mention of these two extra pins in any literature I found.


Is this supposed to use the same battery temp sensor as the Multi or is it not yet in use (for future feature release) ?


Thanks.



lynx bms
6ce226fc-2807-46fa-a6dd-2b58705a10bf.jpeg (3.0 MiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Alexandra avatar image
Alexandra answered ·

1000034588.jpg (209.5 KiB)
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

dc-marine avatar image dc-marine commented ·
Thanks
0 Likes 0 ·

Related Resources

LED indications, warnings, alarm and error codes

Lynx Smart BMS product page

Lynx Smart BMS online manual

Additional resources still need to be added for this topic