question

homestorage-77 avatar image
homestorage-77 asked

Why, with a charge limit of zero is my Multiplus charging?

I have the charge and discharge currents set to zero as it's a scheduled charging session, but my voltage is high enough I don't want to charge.

This is confirmed by the ESS#6 & #7 warnings displayed below.

screenshot-2024-04-10-at-000325.png

However my system is still charging? Why? What must I set to prevent it charging?

I don't want to mess with the scheduled charging period, the limits are set through the nodered instance running on my Venus GX based on voltage.


Thanks for any support


Multiplus-IIVenus GX - VGXscheduled charge
screenshot-2024-04-10-at-000325.png (62.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
prein avatar image
prein answered ·

I don't know, but maybe the 0% SoC has something to do with it?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

homestorage-77 avatar image
homestorage-77 answered ·

To fix this I just set the switch position to 'off' when the charge current limit is zero during the scheduled charge period, via a function in Nodered


screenshot-2024-04-15-at-213232.png

screenshot-2024-04-15-at-213232.png (207.1 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.