question

Bill avatar image
Bill asked

Quickly disabling cerbogx relay 1

Is there a quick way to disable the temp controlled relay #1? Thanks, Bill

Relay
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Alexandra avatar image
Alexandra answered ·

@Bill

A software or hardware solution?

And on what device?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Bill avatar image
Bill answered ·

On the Cerbo, I am using relay 1 to control some fans based on temps, but there will be times I do not want them to run as I will be traveling and they would pull in very hot air from the engine if they run. So hopefully I can do it from vrm or even the web console. -Bill

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Alexandra avatar image Alexandra ♦ commented ·

From the VRM it is easy as the side bar has links. Relay 1 and relay 2


1000034448.jpg

0 Likes 0 ·
1000034448.jpg (154.8 KiB)

Related Resources

Additional resources still need to be added for this topic