Just got Mk3 so I'm able to experiment with different charge powers and monitor the temp. At max charge power Multiplus overheats occasionaly. What would be a good target temperature when charging for Multiplus? 40 Celcius?
This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Just got Mk3 so I'm able to experiment with different charge powers and monitor the temp. At max charge power Multiplus overheats occasionaly. What would be a good target temperature when charging for Multiplus? 40 Celcius?
@pekkaj Ambient temperature at 25 degrees C should be your reference target and even lower as the internal device temperature will obviously be much higher under load. If you look at the spec sheet it shows the derating when inverting as a guide. Personally I charge at 60-80% power when for prolonged periods e.g. 4 hrs. Also, ensure there is adequate airflow for the device.
Additional resources still need to be added for this topic
108 People are following this question.