question

jbowman avatar image
jbowman asked

Different voltages between battery and Lynx distribution

Shore power unplugged.

Troubleshooting charging issues when found the Lynx distribution bars showing 7.xx volts with the battery at 10.7.

4.0 AWG wire from battery to smart shut and 300amp mega fuse to lynx distribution. Seems to much of a drop in voltage. What am I missing?

lynx distributor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Sarah avatar image
Sarah answered ·

Hi @jbowman i would start by checking that all of your connections are secure and tight and that there are no damaged cables or lugs.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

blindbadger avatar image blindbadger commented ·
Also make sure there’s no insulation getting in between your connections. Had this happen to me and that’s what caused it.
1 Like 1 ·