question

ana-carvalho avatar image
ana-carvalho asked

Battery powering load through Charge Controller

Hi all,

I just got an MPPT SmartSolar Charge Controller, which I'll connect to my PV panels and lithium batteries. I will also connect a load in the load output of the charge controller.

I would like to know if it is possible to program the SmartSolar to direct the power from the batteries into the load when the PV power is low.

Thank you!

MPPT ControllersLithium Batterycharger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
ceriw avatar image
ceriw answered ·

Yes, you can control it from the Victron Connect app

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Chargers.

Additional resources still need to be added for this topic

Additional resources still need to be added for this topic

Battery Compatibility

Did You Know - How to create a battery profile for non-Victron batteries?

MPPT Product Page

MPPT Error codes

MPPT 150/60 up to 250/70 Manual