question

You would use the vebus node and set the input AC current limit (in Amps) if you wanted to restrict grid usage.

If you aren't exporting, you can use the settings node and set the DVCC max charge current to limit battery charge, this will also limit max DC PV production. If you are exporting, this parameter is ignored.

Thanks for the tip.

I would like to be able to dynamically adjust the limit. So this leaves me with the problem how to calculate the maximum.

Let's say I'm using 4A in my house, I want to set the limit on 10A from the grid. The maximum charge current would be 6A.

But these numbers are changing every time.

The idea is that I want to keep my battery on a certain level. When I use more then 10A, the extra power should come from the battery. It's called Peak Shaving I think.

Possible?

Did you work it out? I think the following overview should give you a good start. Whenever the load value changes, it will recalculate. You might want to limit this, however, so it's not re-calculating and changing every second. eg. You might want it to re-calculate only every 5 minutes, or only if the change in load is bigger than a certain amount.

Yes, I'm almost there. When ready I can post it here.