question

dac07800 avatar image
dac07800 asked

Rochester R3D with Cerbo or Tank 140?

My below ground LPG tank has a new 3-wire Rochester R3D Remote Ready Dial & Magnetoresistive Module. I'd like to have this reading on my Cerbo GX but not sure if it should connect to my Tank 140 or directly to the GX.

The R3D specs show:

Operational Voltage Range 4.5v to 5.5v ratiometric. Resolution Infinite. Operating Current 8mA (No Load). Output Current ±1mA.


Any help will be much appreciated. TIA


cerbo gxtank monitorgx 140
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers