This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
We have a setup where we want to charge a 24V lithium battery bank from a 48V source by using ORION DC/DC 48/24. The 24V lithium bank is managed by a Victron VE.bus BMS. Can we connect the charge disconnect on the BMS directly to the "H" connection (remote) on the Orion to switch it on and off ? Or is there a better way ?
Looks like nobody answered this, a bit late but here goes.
Yes, you hook up the H on the remote to the VE.Bus BMS Charge signal, but also remember to hook the L on the Orion remote to the battery negative as well to complete the switched circuit.
