question

solsystem avatar image
solsystem asked

Power fluctuations when viewing wattage output via Victron connect.

Hello, I have noticed sometimes a dip in the wattage output of my panels when viewing through the Victron App when charging in bulk mode. The panels are in full light and no birds etc flying nearby...This seems to happen in the higher end of the wattage output. The output will drop from 260 watts down to maybe a 100 then bounce back up...using the 100/30 charge controller..Thanks

charge controller compatibility
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·

@solsystem

If it's happening every 10 minutes, then it's just the mpp tracking. Completely normal.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

solsystem avatar image
solsystem answered ·

Thanks very much

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic