Respect, my name is Kristijan, Ki-Ki elektro nautika, from Croatia. We need your help regarding Victron devices, specifically I am working on the Jeannaue SO440 boat, from the existing equipment it has a Cristec charger 40A, battery isolator Cristec 150-1E-3iG, alternator is Valeo 125A. There are 3 banks of batteries on board - service, engine and bow thruster AGM batteries. The owner wants to install instead of AGM batteries - lifepo4 lithium 200Ah smart + BMS 12/200 Victron + Pheonix inverter 12V 2000Va + 6 solar panels with 3 MPPT regulators Victron Smart 100/20 + 2 DC - DC converters 12/12-18 + battery monitor BMW 712 Smart. I need information regarding the charging of lithium batteries and, if possible, some kind of connection diagram from your side, and information on whether it would be good to mount a separate charger from Victron with one output of 50A only for lithium batteries. The biggest unknown for me is the Smart BMS, considering that I have not installed it yet. My phone number is [moderator note: removed personal contact information], but we can also be in touch via email. Please provide technical support.