question

manuegr avatar image
manuegr asked

Updated MultiPlus 12/3000/120-50 120V Firmware and now not charging

I updated the firmware on my devices. After i completed the update on the MultiPlus 12/3000/120-50 120V, now it only discharging. I checked all the settings and redid the firmware update and no change. Can somebody please help.

1710812769666.png


1710812790968.png

Multiplus-IIfirmware update
1710812769666.png (921.9 KiB)
1710812790968.png (668.2 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

3 Answers
derrick thomas avatar image
derrick thomas answered ·

Did you check the multi configuration with veconfig

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

nickdb avatar image
nickdb answered ·

As documented (and warned) in the process, the config is wiped when an update is done to an inverter. Did you follow all the instructions and reload the configuration?

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

pwfarnell avatar image
pwfarnell answered ·

Step by step instructions for doing this via VRM linked here

https://www.victronenergy.com/live/venus-os:remote_ve.bus_firmware_updates

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.