question

jacko avatar image
jacko asked

What charger are you using for initial charge of victron lifepo4

I have some 24v victron smart lifepo4 batteries to connect in series, i see in the manual it states they should be charged to 28.4 for volts for several hours just wondering how people are doing this? I have various chargers but i dont think i have one with a settable output voltage unless it has cell info e.g i have junsi smart chargers where it would need to see all the individual cell voltages i dont think this will be possible with victrons batteries. Any tips? Thanks Jack

Lithium Battery
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

kai avatar image kai ♦ commented ·

how many are you connecting in series? (manual says only 2x 24v can be wired in series)


0 Likes 0 ·
1 Answer
ben avatar image
ben answered ·

You could use a bench power supply with an adjustable voltage range.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic