This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is GuiV2 in available in VRM via web?
Venus Beta 3.30-18 running on Raspberry Pi.
Behaviour:
1. Select GuiV2 Beta in VRM
2. Remote popup windows launches
3. Splash displays "Downloading UI"
4. Displays "(1) Connecting"
5. Displays "(2) Connected. Awaiting broker messages"
6. Displays "(0) Idle"
Cycles through the above. Is this available as yet with remote VRM login?
Thanks.
All, please only post beta questions for guiv2 in the venus OS beta thread that is a sticky on the page.
Kindly don't open new topics.
First read the existing topic to see if the issue is already known or reported.
Thanks.
It does here, with similar system (raspbarry pi, Venus Beta 3.30-18), after a few seconds the screen appears.
Note as I see you are awaiting messages, I think you need to allow for plaintext mqtt messages for the newUI to work
I investigated further.
As with the GuiV2 requiring MQTT over Plaintext, I DISABLED "use secure connection (HTTPS)" in the "VRM online portal" menu.
This made GuiV2 available as the remote console on the VRM portal.
