question

roblatour avatar image
roblatour asked

3D prints for mounting PI Zero / Victron VE Direct / MK3 - USB cables

For those who may be interested, I've posted some 3D Printable models for mounting to a wall or backboard a Raspberry PI Zero in a Flirc case, as well as Victron VE Direct / MK3 - USB cables.

These are free / open source models and can be found here:

(Raspberry Pi Zero in a Flicr case) https://www.printables.com/model/805682

(Victron VE Direct / MK3 - USB cables) https://www.printables.com/model/805001

Additionally, I have an earlier 3D print for a Raspberry Pi 4 in a Flirc case posted here:

https://www.printables.com/model/792276


Raspberry PiVE.Directsetupmk3-usb
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

0 Answers

Related Resources

Additional resources still need to be added for this topic

Raspberry Pi running Victron’s Venus firmware - Blog Post

Venus OS Large image: Signal K and Node-RED - Install

raspberrypi install venus image


VE.Direct protocol FAQ

Additional resources still need to be added for this topic