In the technical area https://www.victronenergy.com/support-and-downloads/technical-information
There are two spreadsheets which contain EV Modbus values for the EV charger
Modbus-TCP register list --> start at address 3800
Modbus-TCP register list EVCS --> Start at address 5000
I seem only be able to address the 3800 range on my system, is the 5000 range only used in a specific configuration ?
Also address 3827 (EV Position) states "0=AC input 1;1=AC output;2=AC input 2"
But address 5026 states "0 - Inverter Ac Out, 1 - Inverter Ac Input"
On my setup the EV charger is physically connected to AC input however address 3827 reports "1" which would be correct for address 5026 but not 3827