question

buddhafragt avatar image
buddhafragt asked

MPPTs after restart not recognize in node-red

Hello,

I have connected 2 MPPTs with the origninal Victron cable to a Raspberry.

When I restart the system, I always have the problem, in Node-Red the MPPTs are lost...

Is there a way to avoid it?bildschirmfoto-2024-03-14-um-172720.png

MPPT ControllersNode-RED
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Dirk-Jan Faber (Victron Energy) avatar image
Dirk-Jan Faber (Victron Energy) answered ·

It looks like you are running an older version of the GX firmware (checked your sites and all run v2.9x). That means that the node-red-contrib-victron version you run is from before version v1.4.25 (https://github.com/victronenergy/node-red-contrib-victron/releases/tag/v1.4.25), where this problem was solved.

My advice is to update the firmware to the latest official release (which includes v1.5.x of node-red-contrib-victron).

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.