This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Dears,
Can you help me fixing packet loss? The issue occurs on LAN and WiFi. I tried changing LAN cable, router, GX version upgrade, but issue still occurs. Seems if I shut down Multiplus-II GX after power up the issue does not occur for the first 24 hours. Sometimes unplugging cable and reconnecting helps but not always. It's always the same issue -- every 4 minutes, 3 packets drop. This is causing remote console to disconnect and also disrupt any updates running.
Thank you
Daniele
The only thing I can think of off the top of my head is the inverter is running hot, so the GX is affected which influences stability.
Thank you Alexandra for your response but temperature is not the cause. Current invertor (3.2kW) load is 200W and temperature in the room is 5-10C and it's very consistent. Every 4 minutes 3 packets lost.
e.g.
Ping statistics for 192.168.XX.XX:
Packets: Sent = 159, Received = 156, Lost = 3 (1% loss),
Approximate round trip times in milli-seconds:
Minimum = 1ms, Maximum = 18ms, Average = 1ms
I've fixed your user profile to prevent your email address appearing in posts
Is your network cable routed adjacent to any AC cables? if so, try and separate by 50mm. Unlikely the issue but worth checking.
A few other questions,
Do you have a fridge or freezer connected to your AC loads?
Is the installation off-grid on grid connected?
Can you provide a photo of the installed Multiplus?
