question

diva39 avatar image
diva39 asked

MultiPlus 500 VA overloaded in inverter mode while connected to 230V

I accidently connected the vacuum cleaner (approx. 1800W) to one of the sockets connected to my MultiPlus 500 while shore power was connected. It made a strong buzzing noise as from a relay switching really fast. The inverter works as usual but, now I noticed that the MultiPlus will not charge the battery and are not able to switch over to shore power as before when connected.

Did I burn the “push true” relay or is there any fuses on the 230V level?

battery charging
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Guy Stewart (Victron Community Manager) avatar image
Guy Stewart (Victron Community Manager) answered ·

It would have to be tested to be sure.

Next step would be to fill out this form.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic