This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
i have connecties bmv 700 To a single agm battery. The monitor keeps telling that about 200 watts is drawn from battery, although all obvious powersources are disconnected. Battery percentage drops although the battery is full or charging. Charging connections om shunt does mot help. Resetting also not
That sounds bad.
Post a photo of the shunt and battery please.
Upon initial review it seems that the shunt or PCB board is somehow connected in reverse.
Check that the 'battery' side of the shunt is ONLY connected to the battery and that ALL other connection's for charge sources and loads are connected to other side marked 'load/charger'.
