This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Good evening,
is it possible to configure / control / switch the load output of the Smart Solar MPPT 75/15 via Venus OS (installed on Raspberry 3B+, connected with USB-VE.Direct interface)?
According to the manual it works using a MPPT Control display - so why not with the Raspi?
Same question here. You should be able to do it with NodeRed, but as far as saw, that's not working... I think it's one of the most wanted features of the MPPT, to remotely control it (from GX GUI or NodeRed or VRM) to turn the Load ON/OFF.
