question

trent-w avatar image
trent-w asked

Re adjust Battery values and parameters

Hey guys

I have a Orion 12/12 30 dc dc charger and would like to Re adjust my parameters. Do I have to go through the initial procedure again such as isolate power, disconnect bridging wire adjust on APP then connect all again? Or can just adjust on the go via the app? Thanks

orion dc-dc
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
pwfarnell avatar image
pwfarnell answered ·

Just use the app, I alter my MPPT charger with it running. If you want to be more cautious, when going into battery settings one of the top items is "Charger enabled", disable the charger while you make the changes then re-enable it.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

trent-w avatar image trent-w commented ·
Thanks so much
0 Likes 0 ·

Related Resources

Victron DC to DC Converters Product Range

__________