This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I installed a Victron Orion 18amp DC-DC charger. I have a 3 bank BEP switch cluster with dual DVSRs. I cannot get the charger to turn on if I'm not on shore power/running the engines. As a result my house lithium cannot provide power to my DC loads. Any advice. Thanks.
Do you have it in set up in power supply mode?
Yes. When I disconnect shore power the voltage drops to 12.6 after 5 minutes are so and charger shuts down.
