question

eleanor avatar image
eleanor asked

Quattro 24/5000/120 Aux port not responding

Having difficulty configuring Electrodacus EXTIO3 (LVD) and EXTIO4 (HVD) with quattro 24/5000/120 aux1 and T sense ports. Have wired correctly and configured the Quattro for 2 signal BMS assistant with VEConfigure 3, following the "Soggy Paws" connection guide, but Quattro charger (load) does not disconnect when commanded by EXTIO4 port. There is not a lot of easy to follow information about how these ports communicate with each other or how to trouble shoot etc. Any help would be greatly appreciated

MultiPlus Quattro Inverter Charger
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

You need dry contacts on the BMS to open and close AUX/T-Sense.

If your BMS sends some kind of voltage it might not work.

You could also try to use two "Inverting remote on-off" cables.
https://www.victronenergy.com/cables/inverting-remote-on-off-cable

PS: Some gridcodes use AUX1 for controlling grid feedback. You have to uncheck that setting or use AUX2 instead.

1708086851215.png


1708086851215.png (45.3 KiB)
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

eleanor avatar image
eleanor answered ·

Thanks for the advice will change configurations etc and let you know. Again many thanks

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.