question

groningen avatar image
groningen asked

Which is best or are they the same, T-sensse VS BMV

I assume I have two options to connect the Temp sensor i.e. in T-sense via Quattro or BMV 712 (this is the hardware I have).


However, I do note that two temp sensors are available, the normal sensor that came with Quattro and the optional sensor for the BMV.


My questions is, does it matter which one I use for the configuration (i.e. BMV does not have an advantage over the Quattro)?




Temperature Sensor
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

2 Answers
JohnC avatar image
JohnC answered ·

@Groningen

They should give the same reults. The problem using the BMV one is that is takes up the port which you might want to use for extra battery readings.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

groningen avatar image
groningen answered ·

@JohnC


Ok clear. Thanks for the prompt response.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron temperature sensor disambiguation table - which product supports which sensor