This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
I have SmartLithium 200ah 12v battery, smallBMS, cyrix-li-charge, 2 Orion 12/12 30a and Phoenix Smart charger. Apart from the Victron devices, there are 2 Epever MPPTs that do not have a remote control. My questions are: 1- Can the SmallBMS Charger output activate the Cyrix-Li-Charge on contact 85, as it only has 10mA available? 2- Can the SmallBMS Charger output be distributed to the Cyrix-Li-Charge, the 2 Orion 12/12 30a Isolated and the Phoenix Smart Charger?
Better do some research on that.
1. The datasheet for the SmallBMS states that it can be used with the Cyrix-Li-Charge.
2. If you are connecting 4 devices to the allow to charge output of the SmallBMS then I would use a Victron SolidSwitch 104. The SmallBMS ATC turns the SolidSwitch on/off and the SolidSwitch with its higher current rating can turn multiple chargers on and off.
Can I use the Cyrix-Li-Charge just as an auxiliary relay to supply 12v to remote 2 Orion and Phoenix?
