Is it possible via VRM, or even Node-RED, to see the power factor of the loads?
Searching the forums did not yield an answer, only general power factor queries
asked
Current Power Factor
I don't think Victron report it, but you could calculate it yourself. One place the data necessary is all together on the same line - the Marine MFD app. Type 'venus.local/app' in a browser..
In theory, yes.
In practice, the 1 minute logging interval causes severe data integrity issues, resulting in a calculated that in my installation ranges between 0.18 and 4.99.
The value must be calculated at a common timestamp of real power and apparent power
@deon.korb
That app is per second monitoring, it's local not via VRM. The sample times even then may not coincide, but if you watch it for a while you'll get a feel for the averages. There's no better way that I know of.
