question

focus11 avatar image
focus11 asked

AC out 2 is not monitorized separately than AC out 1

Hi everybody!

I have a sistem with 2 Fronius inverters, 1 Multiplus 2 and Pylontech batteries, configured like in pictures below.

I have also an ET112 installed at the head of grid.

When I have consumption on AC out 2 (around 3000w), that consumption is added together with that on AC out 1 and displayed in the application under "Critical Loads".

What can I do to see those values displayed separately, each in its place?

Something is installed or programmed wrong?

Thank you in advance! 1000052723.jpg

1000052724.jpg


ac-out-2
1000052723.jpg (359.6 KiB)
1000052724.jpg (298.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Matthias Lange - DE avatar image
Matthias Lange - DE answered ·

There is no extra current sensor for the AC Out 2.

You could add another ET112 for that but I'm not sure if it will be shown separately on the dashboard.

I think you will only be able to see that in the advanced view.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic