question

solidstore avatar image
solidstore Suspended asked

No data - PV Voltage/Current - VRM

I have a SmartSolar 150/100 connected to a GlobalLink via Bluetooth. The VRM shows data for all the other metrics except PV charger voltage and current. How do I view the PV voltage and current please?

capture.png



VRM
capture.png (267.7 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

4 Answers
Paul B avatar image
Paul B answered ·

You have to turn it on in the vrm advanced tab, at the top and then the graphic equaliser icon..

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

sharpidea avatar image
sharpidea answered ·

Well Paul, doesn't work in my installation! anyone else have an answer or will Victron be adding this data support to the Global Link 520 transmitted to the VRM, the widget is there just no data getting to it from the Global link.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

christern avatar image
christern answered ·

Works for me.mppt-solar.jpg


mppt-solar.jpg (29.0 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

bradshaw106 avatar image
bradshaw106 answered ·

Not sure if your still looking for an answer. I had the same issue with my 75/15 with a global link. Once I connected the two with a ve direct cable I was able to view the pv voltage data

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.