I just installed a new house bank of 4 12Volt Odyssey ODS-AGM480FT batteries (217ah each). I am looking for advice in what settings to use on my Victron MMTP 100/30
asked
MMTP 100/30 setup for Odyssee Batteries
Hi @Bill
Try the Gel(1) or Gel(2) preset.
If those 4 batteries are paralleled in a 12V system then I'd lower the Absorb V to a max of 14.2V, and Float V to say 13.6V. This may be different to what Odyssey offer, but battery makers don't give suggestions for parallel systems.
For Temp Compensation, Odyssey seem to use -3mV/cell, so -18 would do there for a 12V system.
Any adjustments you make can be saved to a Custom Preset named as you choose.
