Hello Everyone,
im using a Battery Protect 12/24V 64 A and a Victron SmartSolar MPPT 100/20 Charger 12V 24V 48V incl. Bluetoot for a 24 V lead acid battery system.
On the Batterie charger i don`t use the "Load" output. To Protect the Batterie again under-voltage i use the Battery Protect.
The batteries I use are lead acid batterys for cars. I Know that this is not perfect and not so cycle stable, but the two big car batteries are already there.
I would use the setting Nr. 8 at the battery protect, witch have the highest cut of voltage (24 V) even i would like to use a even higher voltage of aroud 24.4V according to this Website https://naturesgenerator.com/blogs/news/lead-acid-battery-voltage-chart.
But at the SmartSolar I don`t know what battery type to choos in the app an with or without Automatic equalization .
What are your experiences when using lead acid batterys from cars/ in general? What settings would you recommend for the SmartSolar Charger?