This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Hello I have a problem with frequency generation by Victron, namely when the voltage comes from the grid, the frequency is 50 hz, when I switch to off grid the frequency jumps to 51.5 and cuts off my production from the solar edge installation. Does anyone have an idea what could be wrong in the logs? nothing shows any errors
Nobody knows? :) there is one more variable, this happens when the victrons disconnect from the grid due to too high voltage, if I disconnect the grid manually at this point, the photovoltaic installation starts working normally and does not increase the frequency anymore
the problem is still unresolved, there is one variable that I have observed, if only the grid is manually operated with the switch, then the victron works as it should, there is no problem with the frequency, it is still 50hz and it turns on the solaredge installations
hello still no issue for that problem nobody dont know what doo to help me?
Cover some basics please The array connected to AC1 out. The size of the array what you are using to monitor the output of the array to integrate with victron systems?
