I monitor my battery charge through the multiplus, however there is a dangerous problem with the system. I have noticed that sometimes when the unit charges at 3000 watts, that it skips from wherever it is to 100% SOC. Battery charge voltage is at 55.2V, but even when the battery is at 54.84V it wants to skip to 100%. I don't see any errors on my BMS, but the multiplus skips to bulk and wants to remain at 100%. This is dangerous, because when I don't monitor the system, it will discharge to dangerously low levels, leaving the BMS to jump in for safety. Anyone have an idea what might be happening?