question

joomies avatar image
joomies asked

Multiplus 3000VA and VE.Bus Smart dongle installation

Hi

If I install VE.Bus Smart dongle to the Multiplus 12/3000/120 (16A), do I need to install T-sense and/or V-Sense cables directly to Multiplus? I guess not, but I wan to be shure.


Thank you

VE.Bus Smart Dongle
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Mark avatar image
Mark answered ·

NO - to provide accurate data the VE.Bus Smart Dongle should be powered directly from the battery terminals or a bus-bar close by.

If using the external temperature sensor then the sensor must be placed directly on the positive battery terminal to detect the actual battery temperature.

If using the VE.Bus Smart Dongle internal temperature sensor then the VE.Bus Smart Dongle should be stuck to the side of the battery casing.

1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

joomies avatar image joomies commented ·

Thank you!

0 Likes 0 ·

Related Resources

Additional resources still need to be added for this topic