Serbo GX/S to DSE 8620

Question

replit

This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.

question

paabbott asked Jan 19, '24

I have a Cerbo GX and a DSE 8620 unit begging to communicate with one another.

I know that the DES 8610 is officially mentioned and supported.

Question: 1. Is the DSE 8620 supported by now or is the support in progress?

2. If not could it be done manually ie developed through adapting the 8610 profiles if possible

Deep Sea DSE generator controller

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 1 · 2024-01-24T11:05:25Z

Philipp Trenz answered · Jan 24 at 11:05 AM

Hi, Philipp from Victron here. The DSE 8620 is not yet supported, but we are happy to add support for it. Do you have a unit available to test with?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Answer 2 · 2024-01-24T13:07:48Z

paabbott answered · Jan 24 at 01:07 PM

Good day, Phillip.

We would really appreciate it if you were to add the support for it as it would increase the value of the packaged solution that we are developing.

Yes, we have the two units deployed at our facility running on actual equipment that supports the facility.

If that is what you are looking for or are you looking for a bench test kind of setup?

2 |3000

Attachments: Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.