Hi Victron Community
On my boat I have a CERBO GX, a LYNX Shunt, and a lot of other VE.CAN devices. I connected the VE.CAN to NMEA2000 adapter, and all works perfectly. I can read the Victron data on the N2K bus via my Raymarine plotter. All good - until the time I switch-off the power on the NMEA2000 bus (Bus is off if I am not on the boat). If NO NMEA 2000 bus available, the VE.BUS communication has problems, and e.g. the Shunt information (current Amps) is missing (because there is not "end resistant"???).
Does anyone has an idea how this problem can be overcome so that the VE.CAN Bus shows correct information if the N2K bus is not running?
Thanks