question

pgon avatar image
pgon asked

How to wire a Hyundai HY4500SEi to a Cerbo GX?

I have a Hyundai HY4500SEi generator I would like to control from the Cerbo GX. The Generator does not have an ATS plug but is remotely controlled from a key fob with start and stop buttons.

Have anyone done this or have an idea on how to do it?

remote start
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
Paul B avatar image
Paul B answered ·

you will need to purchase a gen auto-start unit ie a Mebay DC-30 unit then wire that into your gen and then install the mebay trigger to the cerbos relay number one.

There are other units out there as well. and if you search this forum for generator autostart you should fine a basic wiring diagram

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic