This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
On my MP 5000/24,there are two unmarked RJ45 sockets right next to the AC connections. However, these are not labeled in any way, either in the documentation or on the MP itself. I need to connect both the ve bus and the can for a bms - but which is which?
They are both VE.Bus. There are two connectors to enable loop through to the next device in a chain.
There are no VE.CAN (or CANBUS) connectors on a MultiPlus.
CAN for a BMS will connect to the CAN or VE.CAN connectors which are presented on a Venus device such as CCGX or VenusGX.
