Dear Victron Forum
I have a Daly 400amper bms (I wanted 300 but they didn't have in stock). Connected to a Multiplus-ii 48/5000. I have 16*lipo accus of 306ah.
The Daly is working via Bluetooth on my mobile phone. I have set the protocol type on the app to "victron energy"
The Daly b- cables go to a victron shunt then to a busbar then to the multiplus
There is a positive cable from the positive of the "final" accu, to a main switch then to a 300amper fuse, then to a busbar, before going to the positive terminal of the multiplus.
The ac out 1 goes to the fuse box.
When I turn on the multiplus the "inverter on" lamp flashes as well as the "charger absorption" light. They blink alternatively.
What must I do to get the multiplus and bms to communicate?
There are two "ve.bus" connections on the multiplus-ii and the Daly bms has 2* can wires, 2*485 wires and a ground cable.
Please help as I am meant to go travelling with my truck next week and I need to get the electricity fixed.
Thanks Paul, Netherlands