question

pulith avatar image
pulith asked

Multiplus-II Gx and smart charge controller

I have a multiplus-II GX i am new to victron and i am having few issues. I have 3 charge controllers bluetooth and ve.can supported two of 250/70 and 150/70. I daisy changed all 3 and used a terminator on the last slot of the last charger, then from the 1st charger i used again ve.can and . Yet in remoteconsole i dont see any charging function connected the other end to ve.bus and terminated the other bus. @Andy

smart solar set-up help
1 comment
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Mike Dorsett avatar image Mike Dorsett commented ·

connected the other end to ve.bus and terminated the other bus

VE CAN for the charge controllers is not the same as VE-bus I think....

0 Likes 0 ·
1 Answer
pulith avatar image
pulith answered ·

I tried ve can ve bus ve direct yet all give the same outcome.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic