question

nvs avatar image
nvs asked

2 x SmartBatteryProtect ont the VE.Bus BMS V2

Hello, can I put 2 disconnect loads on the same disconnect loads port available on the BMS V2 . My first SBP is on the orion converter 24/70 to 12v that will on/off the converter and not the loads, and the second SBP will be for my 24V loads that will disconnect the loads directly...


Thank you

Battery Protect
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
pwfarnell avatar image
pwfarnell answered ·

That should be fine, the ATD port on the BMS is rated to 1A and the Smart Battery Protects only consume a few mA each.

2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.