question

panicman avatar image
panicman asked

Seplos BMS is recognized as LG resu battery since last update

Hello,

i have an customer which has the EEL Battery with Seplos BMS in it an working fine for months. It also shows and monitors all the details:

1702458979225.png

Before it was recognized correctly:

1702459077440.png

But for some reason, we changed nothing there else except the automatic update to v3.13 of the venusOS recently, but since then, the Seplos is recognized as LG resu battery and the details are gone:

1702459162328.png

Any Idea how that could happen and how to bring it back? Could it be that the protocol hat changed in the BMS by itself?

Thanks a lot!

Venus OSBMSprotocol
1702458979225.png (32.5 KiB)
1702459077440.png (23.9 KiB)
1702459162328.png (23.4 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
panicman avatar image
panicman answered ·

Ok, have the Solution, for some reason the CAN Protocol changed to:

1702552053093.jpeg

After switching it back to VCTR the Details tab is immediately shown and also the min/max cell values!


1702552053093.jpeg (97.8 KiB)
2 |3000
Toggle Comment visibility. Current Visibility: Viewable by all users

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)

Victron VE.Bus BMS product page

Victron 3rd party BMS compatibility page

Additional resources still need to be added for this topic