question

achim-brand avatar image
achim-brand asked

Felicitysolar LPBF48300 on Multiplus 5000 is always charging from grid

Hi,

Yesterday I installed Felicitysolar LPBF48300 on Multiplus 5000 with a Raspi running Venus OS. I inject virtual grid and PV meters via MQTT. Everything seems to run fine. Venus OS recognizes everything correct.

But my battery gets always charged from grid, even if there is zero PV power available.

Any idea what the problem is? Could someone pls share the battery values for sustain voltage, absorption, shut down SOC, restart, cut off, alarm...?

Venus OSbatteryvictron
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
achim-brand avatar image
achim-brand answered ·

Issue resolved: I injected the grid values from my PV smart grid meter. Unfortunately, Victron / Venus OS expects inverse values, so a ' * -1' did the trick.


Nonetheless, I'm still interested in the right values for sustain voltage and so on...


Thank you

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Additional resources still need to be added for this topic

Victron Venus OS Open Source intro page

Venus OS GitHub (please do not post to this)