Is it possible to run two Multiplus's in Parallel but have the AC Outputs on different circuits?
IE:
SHORE 1 -> Multiplus 1-> AC Bank 1
......................... \ DC /
Battery Bank ---------> DC Bank
......................... / DC \
SHORE 2 - > Multiplus 2-> AC Bank 2
I am current on a Catamaran and my Port / Starboard hulls have two completely separate AC Banks that I do not want to combine. I would like to use a separate Multiplus per bank with the same battery bank. When I turn on inverter power I am ok with turning on inverter on both sides at the same time.
This does go against what it says here https://www.victronenergy.com/live/ve.bus:manual_parallel_and_three_phase_systems that the AC Current should be balanced amongst each Multiplus. As the port side might draw 500W where the starboard will be drawing 0W.
Regards,
Rob