question

benwin avatar image
benwin asked

BMV-712 relay voltage different to supply voltage

My BMV-712 is attached to a 48v battery but the solenoid I wish to control via the BMV relay needs 12v, I assume the relay on the BMV is isolated from the hookup power supply but just wanted to check!


Thanks

BMV Battery MonitorRelay
2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

1 Answer
kevgermany avatar image
kevgermany answered ·

Yes, you need to supply the power. The electrical guys call it dry.

2 |3000

Up to 8 attachments (including images) can be used with a maximum of 190.8 MiB each and 286.6 MiB total.

Related Resources

Victron BMV battery monitors product page

Additional resources still need to be added for this topic