This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
So I have 2 solar chargers connected through the VEdirect ports and the BMV712 connect to Venus through the USB. I am able to see BMV712 as connected device and see info as widget in advanced but I am sure there is a way to see BMV712 info in overview like I did when connected through VEdirect?
Hi @treejohnny
The BMV should work through usb just the same as on ve.direct connection.
Did you do a reboot so the old connection is forgotten?
I didn't 'reboot' through software but I did power cycle it. The biggest letdown is that the battery info is not on the landing screen of VRM like it was before.
I found the problem, the battery monitor was selected with the old connection, and because a different connection leads to a 'new' device in the list, this 'new' device needed to be selected as 'battery monitor'
I took the liberty of changing the setting for you.
Thank You!!
I kept trying to find the setting in the portal without going into the ‘Remote Console’, duh.
