This site is now in read-only archive mode. Please move all discussion, and create a new account at the new Victron Community site.
Is there a simple way to display that status of a Digital Input (such as bilge pump alarm) on the Touch70 display ? I have dug through menu and can see where to configure in settings but nothing to have it display status on the Touch70 display. As a side note we do have it displaying status on VRM advanced page. thx
Not in the stock Victron firmware but ...
GuiMods provides a additional overview page for tanks, temps and digital inputs
https://github.com/kwindrem/GuiMods
